0
My Basket
Superior MotionCam (PhOD) Fibra
Save
100%
100%
Superior MotionCam (PhOD) Fibra has a built-in camera that takes photos once the detector is triggered. It needs just 9 seconds to show the actual situation on the scene. With visual evidence available in Ajax apps, the security company can quickly check whether the threat is real to respond accordingly. Photo verification relieves users of unnecessary anxiety and security companies of false patrol calls. It takes one tap for the user to take an on-demand photo at any time to monitor the house's state. Also, the detector can automatically take pictures by an alarm of another device in the system, by a specific schedule, and by arming or disarming.
- Bus connection with 4-core cable, up to 2000 meters (when using twisted pair U/UTP CAT5)
- Ignores cats and dogs with a weight of up to 20 kg and height of up to 50 cm
- Alarm signal delivery time of 0.15 s, photo delivery time of <9 s (with default settings)
- Maximum detection distance of 12m
- Accurately detects motion in heat conditions, even at a temperature of +40°С
- Vertical detection: 80°
- Horizontal detection: 88.5°
| Technical Specifications | |
| Classification | Wired PIR motion detector with extended photo verification possibilities |
| Installation method | Indoors |
| Compatibility | Operates with Hub Hybrid (2G) and Hub Hybrid (4G) only |
| Sensing element | PIR sensor |
| Alarm signal delivery time | 0.15s |
| Motion detection distance | Up to 12m |
| Detection angles | Horizontal: 88.5° Vertical: 80° |
| Camera view angle | 90° |
| IR backlight for night mode pictures | Yes |
| Photo verification | Photo by alarm - built-in camera is activated if the detector is armed, and motion is detected Photo on demand - user takes pictures at any time or when the detector is armed (depends on settings). The feature is disabled by default. Photo by scenario - built-in camera takes pictures automatically when a scenario is triggered. The feature is disabled by default. Photo on schedule - built-in camera automatically takes photos at a specified time. This feature is available for hubs with firmware version OS Malevich 2.19 or higher Photo by arming/disarming - detector automatically takes photos when the security state is changed Time to deliver a photograph with default settings: up to 9 sec Resolution: 640 x 480px, 320 x 240px (default), 160 x 120 px Pictures in series: 1-5 |
| Recommended installation height | 2.4m |
| Pet immunity | Weight: up to 20 kg Height: up to 50 cm |
| Fibra technology | Recommended cable type for detector connection: Signal cable (4 x 0.22 copper) / Twisted pair U/UTP CAT5 (4 x 2 x 0.51) Connection wire length: Up to 2000m Device polling period: 12−300 s |
| Power supply | Power supply voltage: 24V Power consumption: up to 14.2 mA |
| Auxiliary power supply | Sealed LTO AA battery (used when the detector takes photos, activates an IR backlight, and transmits an alarm. The battery is charged from the Fibra line) |
| Permissible humidity | Up to 75% |
| Operating temperature range | -10°С to +40°С |
| Anti-sabotage | Protection against fraud Tamper-resistant |
| Dimensions | 135mm х 70mm x 66mm |
| Weight | 160g |
| Certification | EN 50131 (Grade 2), PD 6662:2017, IP50 |
