Motorised Bullet Camera (2MP, WDR)
Part of the Hanwha X-series, this Hanwha IP bullet camera boasts an impressive 2 megapixel HD recording resolution and a motorised 2.8-12mm auto-focusing lens. Supporting H.264/H.265 compression and 50m of IR range; this camera also features a built-in MicroSD card slot.
- Vandal Resistant (IK10 Rating)
- Resolution: 2MP (1920 x 1080), POE
- Motorised 2.8-12mm Lens, Angles 119.5° ~ 27.9° (H)
- Smart IR, Up To 50m IR Range
- MicroSD Card Slot
- Day/Night, IR Cut Filter, 3D DNR
- WDR, OSD, Triple Streams
- Privacy Mask, Motion Mask, ROI
- Supports H.264, H.265
- ONVIF Compliance (Profile G, S, T)
- Temperature Range -40°C to 55°C
- Metal Housing, NEMA4X
Camera
Day/Night
Network
General
Interface
This camera has the following special features:
IK10 Rating
An IK rating refers to how much mechanical impact a product can resist and is defined in IEC 62262. An IK10 rating means the product is protected against 20 joules impact; this is equivalent to an impact from a 5kg mass dropped from 400 mm above the impacted surface.
NEMA4X Rating
The NEMA system is a tiered rating system established by the National Electrical Manufacturers Association. Each rating identifies a specific set of protective characteristics that an enclosure with that rating provides. A NEMA4X rating means the product is protected against the ingress of foreign objects (such as dust), water and is corrosion-resistant.
VCA (Video Content Analysis)
VCA is the ability to automatically analyse video to detect temporal and spatial events. This camera has the capability to do the following:
- Auto-Tracking (digital) - Tracking a specific target until it is out of range
- Audio Detection - Detect a sudden increase or decrease in sound
- Directional Detection - Detect an object moving in a specified direction
- Enter Area - Entering into a pre-defined virtual region
- Face Detection - Detect a human face
- Fog Detection - Detects fog
- Intrusion Detection - Entering and loitering in a pre-defined virtual region
- Leave/Exit Area - Leaving a pre-defined virtual region
- Line Crossing - Detect when a pre-defined virtual line has been crossed
- Motion Detection - Movement within a pre-defined virtual region
- Tamper Identification - Detect when the camera has been physically tampered with