Warning Cookies are used on this site to provide the best user experience and are used for ads personalisation. See our Privacy Policy to understand how they are used.
If you continue, we assume that you agree to receive cookies from this site. OK

Internal Dome Camera (2MP, WDR)

Call us for a price

*Lead time of 2-3 days*

QND-6022R1

Part of the Hanwha Q-series, this Hanwha IP dome camera boasts an impressive 2 megapixel HD recording resolution and a 4mm fixed-focal lens. Supporting H.264/H.265 compression and 20m of IR range; this camera also features a built-in MicroSD card slot.

- Resolution: 2MP (1920 x 1080), POE
- Fixed 4mm Lens, Viewing Angle 88° (H)
- Smart IR, Up To 20m IR Range
- MicroSD Card Slot
- Day/Night, IR Cut Filter, 3D DNR
- WDR, OSD, Triple Streams
- Privacy Mask, Motion Mask, ROI
- Supports H.264, H.265
- ONVIF Compliance (Profile G, S, T)
- Temperature Range -10°C to 55°C
- Plastic Housing

Camera

Image Sensor:
CMOS (1/2.8")
Aperture:
F2.0
Resolution:
2MP
Effective Pixels (H x V):
1920 x 1080
Shutter Speed:
Auto/Manual, 1/5~1/12000s
Back Light Compensation:
Yes
Wide Dynamic Range:
120dB
Digital Noise Reduction:
SSNR
Gain Control:
Low / Middle / High
White Balance:
ATW / AWC / Manual / Indoor / Outdoor
Lens:
Fixed 4mm Lens
Field of View:
88°
Onboard Recording:
Yes, to MicroSD card up to 128GB

DORI

Detect:
40.0m
Observe:
16.0m
Recognise:
8.0m
Identify:
4.0m

Day/Night

Day & Night:
IR Cut Filter (Smart IR)
Minimum Illumination:
Colour 0.03Lux, 0Lux with IR on
IR Range:
15-20m

Network

Ethernet:
RJ45 10/100
Supported Protocols:
IPv4, IPv6, IGMP, ICMP, ARP, TCP, UDP, DHCP, PPPoE, RTP, RTSP, RTCP, DNS, DDNS, NTP, FTP, UPnP, HTTP, HTTPS, SMTP, 802.1x, SNMP, QoS, RTMP, SSL/TLS, SSH
ONVIF:
Supports ONVIF (Profile G, S, T)
POE:
Yes
Main Stream:
1920x1080@30fps
Sub Stream:
720x576@25fps

General

Power:
DC 12V / PoE (IEEE 802.3af)
Housing:
Plastic
Power Consumption:
Max 7.4W
Operating Temperature:
-10°C ~ +55°C
Operating Humidity:
0% - 90% RH
Ingress Protection:
N/A
Weight:
255g

Interface

Alarm I/O:
Alarm input (x1), Alarm output (x1)

All dimensions are in millimetres (mm)

This camera has the following special features:

VCA (Video Content Analysis)

VCA is the ability to automatically analyse video to detect temporal and spatial events. This camera has the capability to do the following:

  • Enter Area - Entering into a pre-defined virtual region
  • Intrusion Detection - Entering and loitering in a pre-defined virtual region
  • Leave/Exit Area - Leaving a pre-defined virtual region
  • Line Crossing - Detect when a pre-defined virtual line has been crossed
  • Motion Detection - Movement within a pre-defined virtual region
  • Tamper Identification - Detect when the camera has been physically tampered with
You may be interested in
 



All payments made to DDS are secure and verified